E6000 Glue Multi Purpose Industrial Strength Adhesive Permanent Bond Glue

• Popularity - 45861 views, 6551.6 views per day, 7 days on eBay. Super high amount of views. 1608 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

E6000 Multi Purpose Industrial Strength Adhesive Permanent Bond Glue<br>Available Sizes & Quantities<br>- 0.18 fl oz (1 or 10 Tubes)<br>- 2 fl oz<br>(1 or 6 Tubes)<br>- 3.7 fl oz<br>(1 or 6 Tubes)<br>Follow these step-by-step directions when using E6000 Craft:<br>Read directions and test small area before use.<br>1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.<br>2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C.<br>However, fully cured adhesive can withstand temperatures from -40 to 180 °F / -40 to 82 °C.<br>3. Apply directly to surfaces to be bonded or repaired.<br>4. Allow 24 hours for curing--Maximum bond strength may not be reached for up to 72 hours.<br>5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.<br>6. Clean uncured adhesive with acetone or citrus-based solvents.<br>Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.<br>What temperature range does E6000 withstand?<br>Amazing E6000 can be applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). When cured, E6000 can withstand temperatures between -40 °F and 180 °F (-40 °C to 82 °C).<br>Is E6000 UV resistant?<br>E6000 may be painted over for maximum UV resistance after it has cured.<br>Can E6000 be used on Styrofoam™?<br>No. E6000 is also not recommended for use on any polystyrene, polyethylene or polypropylene plastics.<br>Will E6000 crack or break under stress?<br>No, E6000 dries to a rubber-like consistency that is flexible and moves with adhered material.<br>Is E6000 washer/dryer safe?<br>Yes. E6000 will hold on substrates applied to fabrics that are put through the washer and dryer. Dry cleaning, however, is not recommended.<br>Is E6000 safe for photographs?<br>Yes. E6000 is photograph-safe after a full cure of 24 and 72 hours at 70 °F (21 °C).<br>How long does E6000 take to dry?<br>E6000 starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours.<br>Remember, temperature and humidity will affect dry time. To speed drying, apply heat using a handheld dryer set on low. Do not hold directly on E6000.<br>What is used to clean up uncured E6000?<br>Small amounts of acetone or citrus-based solvents for uncured E6000. Cured Amazing E6000 may be removed by cutting and scraping.<br>